motoring|underground

motoring|underground (http://www.motoringunderground.com/forum/index.php)
-   Accelerating (http://www.motoringunderground.com/forum/forumdisplay.php?f=19)
-   -   Diy/ghetto/redneck r53 pulley removal? (http://www.motoringunderground.com/forum/showthread.php?t=25726)

SRPA125 03-19-2015 09:55 PM

Diy/ghetto/redneck r53 pulley removal?
 
Let's here how your yanking off that pulley (without the proper tool). I Just got my 15 pulley and I really can't justify a $80 tool to pull it. I suppose if that's all there is, then I'll have to buy one tho. Fwiw and before anyone starts bashing me, I'm a mechanic of 21 years with volkswagen. I've bought more Vw "special tools" in my time that I've used once then later realized there was a cheaper (sometimes easier) way around it.

Snip's 03-20-2015 11:05 AM

Check with Chad over at Detroit Tuned.... He rents them for $20....

http://www.detroittuned.com/pulley-removal-tool-rental/

ScottinBend 03-20-2015 04:20 PM

Yea......don't monkey around with the pulley. You f'up the shaft, you are screwed.

Second to none 03-24-2015 06:31 AM

Weld a nut onto the pulley, and turn a bolt against the supercharger shaft and it'll come right off (welded nut heats pulley and gives you a way to hold it with a wrench, and bolt pushes against shaft).

I did this when my pulley remover tool stripped and it worked very easily.


All times are GMT. The time now is 09:52 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
2005 motoring|underground, all rights reserved.