motoring|underground

motoring|underground (http://www.motoringunderground.com/forum/index.php)
-   Braking (http://www.motoringunderground.com/forum/forumdisplay.php?f=22)
-   -   Stainless Steel brake line problem (http://www.motoringunderground.com/forum/showthread.php?t=25463)

Sin MINI 05-06-2014 04:31 AM

Stainless Steel brake line problem
 
So this past winter I upgraded my 2006 R53 front brakes to JCW (aka R56) and put stainless steel brakes lines on all four corners. Last weekend the left front line failed…apparently it was rubbing on the wheel when I turned. the right front was ready to go. My mechanic told me today that when they were installed they observed that they were longer than the rubber lines that came off and that they tried (apparently unsuccessfully) to ensure the lines were routed to avoid any moving parts.

Has anybody else seen this or anything like it? I bought the lines from Detroit Tuned and have the question into Chad but I have to think something went wrong during installation but I've been real happy with my mechanic so I'd like to think the problem lies elsewhere.

Ideas?

nathanrw 05-06-2014 05:30 AM

Seems like a problem that would only be caused by improper installation to me… :disbelief

Rally 05-06-2014 08:27 PM

Unless they were just insanely longer than stock, it just sounds like they installed them with too much slack. It'd be rather easier to have adjusted for the longer length and kept it away from the wheel.

Snip's 05-06-2014 08:43 PM

The strut has a special formed bracket that accepts a rubber grommet that is part of the brake line (generally positioned in the middle of the length).... Is it possible this grommet wasn't properly inserted into the bracket? If not, the line could have been flopping around....

You can see them in the middle of mine....

http://www.motoringunderground.com/f...3&d=1368225820


All times are GMT. The time now is 12:39 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
©2005 motoring|underground, all rights reserved.