motoring|underground

motoring|underground (http://www.motoringunderground.com/forum/index.php)
-   Tire & Wheel (http://www.motoringunderground.com/forum/forumdisplay.php?f=26)
-   -   The BBS RS Gallery (http://www.motoringunderground.com/forum/showthread.php?t=3656)

Mini_Chan 02-21-2013 10:43 PM

Quote:

Originally Posted by nathanrw (Post 774589)
He got those from VR Wheels. So personally, I vote you buy some 16x7, 16x8 RS' from VR Wheels for roughly $800 and have them redrill them for like $250? and just finish them yourself the way you want them. Or just pay someone to do it if you dont feel like messing with it. You could send all the lips off to VIP Modular for high polishing for a really good price.

Does VR Wheels usually carry them in stock because I haven't seen any staggered sets on their site. The only ones they do have that is staggered is drilled both 4x100 and 4x114.3 and they want 1300 for those. But if they usually get more in stock then I can wait for a set to come up.

heres how they look

http://www.vrwheels.com/bbs-rs-modified-p-5007.html

rickyr53 02-21-2013 10:51 PM

Give them a call and ask if they will have any coming in.

Rally 02-21-2013 10:54 PM

You can also just ask them to make them staggered. That's the beauty of 3 piece wheels. Just toss on wider lips or something.

nathanrw 02-22-2013 06:20 AM

Quote:

Originally Posted by Rally (Post 774642)
x2 We have Chrome RSs with Chrome lips here at the shop and they look great.

I would never want to deal with the maintenance of polished RS centers....I hate polished lips enough as it is :P At the very least, get those parts clear powdercoated so you're not stuck polishing for hours each week.

Quote:

Originally Posted by rickyr53 (Post 774640)
Full polish will look good, but if that were the case i would just chrome them haha

Yeah I actually just got through emailing Rotiform and they said they would chrome dip for $600. Stripping and fully polishing is $500 from VIP Modular. Definitely doing chrome...

Quote:

Originally Posted by Mini_Chan (Post 774644)
Does VR Wheels usually carry them in stock because I haven't seen any staggered sets on their site. The only ones they do have that is staggered is drilled both 4x100 and 4x114.3 and they want 1300 for those. But if they usually get more in stock then I can wait for a set to come up.

heres how they look

http://www.vrwheels.com/bbs-rs-modified-p-5007.html

Yeah they get new sets in all the time. Just have to keep checking back. Or do as Rali said, just email them and ask them to make them to your specs. Sure they will cost more, but they'll look nice when you get them in. :tu:
Or you could just look at the 5x114.3 ones and do a 5x114.3 to 4x100 redrill for $250. That usually tends to be a couple hundred cheaper.
Edit: Just looked on the site and they don't really have any in stock right now (on the site at least). Just shoot them an email and see what they say.

Mini_Chan 02-23-2013 04:23 AM

Yea I emailed them yesterday, but haven't gotten a response yet.

nathanrw 02-23-2013 07:24 AM

Quote:

Originally Posted by Mini_Chan (Post 774769)
Yea I emailed them yesterday, but haven't gotten a response yet.

Yeah I emailed them yesterday too about an entire RS center piece and they haven't replied yet... Usually they're on top of it and reply same day.

4Boogie 10-24-2013 03:21 PM

http://i28.photobucket.com/albums/c2...ps0c4b6ebf.jpg


All times are GMT. The time now is 09:45 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
2005 motoring|underground, all rights reserved.