View Single Post
  #1  
Old 05-30-2015, 10:26 PM
joshwiththemini joshwiththemini is offline
N Rated - 87 mph
 
Join Date: Jan 2014
Posts: 22
Default Aftermarket steering wheel resistor/wiring questions

I have a 2013 Mini Cooper that had a multifunction steering wheel. I recently installed a new wheel and just as I expected I had acquired some new dash lights in the process. The lights that came on are the airbag, traction light (yellow) and a brake light ( yellow) to my understanding these lights are now run through the steering, through the clock spring and to the wheel. I plan on using resistors on the wire connects from the clockspring. My question is if anyone has done this or already knows the correct resistances for these wires. A lot of threads show the resistance for the seat airbag wiring but I have yet to come across any for the steering wheel. Also does anyone know if once these resistors are in place of the lights will automatically shut off or if it needs to be done my the dealer. Thanks.
Reply With Quote