View Single Post
  #7  
Old 02-19-2013, 04:09 PM
MtyMous's Avatar
MtyMous MtyMous is offline
μ
 
Join Date: May 2009
Location: Tinker AFB
Posts: 2,980
Default

On the Ram, and most Mopar applications, you also have a smart "Buld Out" system This measures resistance, and requires that you add resistors since the HID bulbs have a lower draw, and will also flicker or turn off because the system things the bulb has failed.

Here's how I got around this. 2 resistors per each side (high beam and low beam) and I fabricated a metal box to hold the resistors and almost act as a secondary heatsink. They are mounted to one of the fog light bolts behind the front bumper where they will get a lot of good air flow to geet rid of the heat they produce, and aren't near anything that is going to melt.

Click the image to open in full size.

Click the image to open in full size.
__________________
"If my calculations are correct, when this baby hits 88 miles per hour, you're gonna see some serious shit."
Reply With Quote