View Single Post
  #34  
Old 10-25-2007, 09:01 PM
Slow Paul Slow Paul is offline
μ
 
Join Date: Feb 2006
Location: Upland, CA
Posts: 13,742
Default

http://www.realoem.com/bmw/showparts...94&hg=31&fg=10
It's the #2.

Very simple to replace,

1. Lift the MINI

2. Take off the wheel

3. Take out the fender liner

4. Use a allen wrench to remove the bolt holding the sensor in the hub

5. Disconect the wire from all areas

-If I'm not mistaken, the end that connects to the electical portion is blue. Push the tab.

6. Install is the reverse MAKE SURE IT CLIPS BACK INTO IT'S ORIGINAL POSITION.

Now that is for the fronts. The left and right are the same part number. In Sire case and mine, the Driver's side ABS sensor was toast.

Good Luck

Keep in mind too I'm just a weekend warrior when it comes to being a mechanic, so if this doesn't fix the problem, you may want to take your car to a dealer or authorized mechanic.
__________________
Live Slow, Die Old
Reply With Quote