View Single Post
  #23  
Old 07-21-2013, 05:27 PM
Snip's's Avatar
Snip's Snip's is offline
Y Rated - 186 mph
 
Join Date: May 2010
Location: Lost in the weeds
Posts: 1,937
Default

^^^ Thanks guy's...

A lady in the village asked me to make a copper hood with a SS filter / fan / light assembly. These are pre-made factory liner inserts by Vent - A - Hood and we insert them into our hoods.

Poor picture of the completed copper hood in my shop... All of the copper bars were 1/4" x 2" electrical copper buss bar that got a hammered finish by hand (this step was really time consuming and I probably won't do that again)....

photo.jpg

She wasn't happy with the "newness" of the copper..... She wanted it to be old looking.... So a muriatic acid wash was applied followed by a satin clear coat to seal in the look.

image.jpg

Here you can see the Vent A Hood insert..... The SS rod "Tool Hangers" are mine....
image_1.jpg

image_2.jpg

Last edited by Snip's; 07-21-2013 at 06:49 PM..
Reply With Quote