motoring|underground  
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Blog

The Garage The place to show off your pride and joy. Show us your motoring masterpiece herein!

Go Back   motoring|underground > The Pits > The Garage
Reply
 
Thread Tools
  #121  
Old 05-25-2019, 11:32 PM
BlwnAway's Avatar
BlwnAway BlwnAway is offline
Y Rated - 186 mph
 
Join Date: Sep 2006
Location: St.Louis, Mo.
Posts: 1,982
Default

It's been a while since an update and now that MOTD is over I've finally got some time.
I wasn't able to get everything done that I wanted for MOTD.

Had a set back over the winter and didn't get the car back together until March.
A few weeks after the Dyno session I developed a coolant leak, ends up that my radiator cap went bad, but not in the good...not holding pressure...way, but in the bad...won't release pressure way, and it built up so much pressure that it blew out the bottom of the radiator core. (One bad thing about aluminum reservoirs, they don't crack first) So I had to have a new radiator made. Luckily there was someone fairly local that builds custom radiators, but he's retired and would only do it in his spare time, so it between the weather and his schedule, it took 4 months to get done.
It's actually a beautiful piece and except for the cost, it's actually better than the earlier one. Plus with this failure, I know without a doubt the rest of the system is completely leak proof, lol.

Click the image to open in full size.

The MOTD trip itself was great, absolutely no issues or drama at all, simply get in the car and drive.
The only issue I had was once there, I wasn't able to give as many rides as I would have liked to, one of the things I couldn't finish before the trip was the BBK, and after a couple of hard pulls up and down the hill by the resort, the current brakes were just glazed over and I had to let them sit a good long time before any more hard driving, which really limited me to offering rides.

I was however able to get a few, nonessential items finally taken care of though.
First was the PCV and addition of a Catch Can. While our engines don't "need" a vacuum source for PCV, and you can simply vent to atmosphere, having it can only be a plus.
The reason I didn't add it right away was that every time I tapped into my vacuum manifold for it, the vacuum would drop so much that it would effect my brake booster and I'd lose power assist, no matter what size line or where I connected. The solution was to add individual ports directly from the intake manifold itself. So, since I need to remove the manifold to ensure no metal into the system I figured I'd clean and dress it up a little too.

The before:

Click the image to open in full size.

During:

Click the image to open in full size.

After:

Click the image to open in full size.

Also added a cover for the injectors to keep rain that comes through the scoop from directly wetting the connections:

Click the image to open in full size.

New Catch Can Bracket fabbed up and mounted:

Click the image to open in full size.

Installed and everything put back together:

Click the image to open in full size.

I also finally got around to building the brackets for my Fire Extinguishers:

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

They follow along with the seats so no issue with them being in the way.

Lastly I found this decal in the bins at Chad's tent, couldn't help but put it on the car....Lol

Click the image to open in full size.
__________________
I'll get another 3rd party hosting site eventually...

Just hope the old one dies a fiery death.
But I'm not bitter....

Last edited by BlwnAway; 05-26-2019 at 12:20 AM..
Reply With Quote
  #122  
Old 05-30-2019, 03:49 AM
werD's Avatar
werD werD is offline
μ
 
Join Date: Apr 2006
Location: In a chair, behind a desk.
Posts: 9,130
Send a message via AIM to werD
Default

Great updates and work!
__________________
Click the image to open in full size.
Just drive dammit.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


CURRENT MOON

All times are GMT. The time now is 02:54 AM.
Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
2005 motoring|underground, all rights reserved.