motoring|underground  
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Blog

Braking Clamping the binders.

Go Back   motoring|underground > On the Lifts > Braking
Reply
 
Thread Tools
  #1  
Old 05-06-2014, 03:31 AM
Sin MINI Sin MINI is offline
Y Rated - 186 mph
 
Join Date: Feb 2007
Posts: 141
Default Stainless Steel brake line problem

So this past winter I upgraded my 2006 R53 front brakes to JCW (aka R56) and put stainless steel brakes lines on all four corners. Last weekend the left front line failed…apparently it was rubbing on the wheel when I turned. the right front was ready to go. My mechanic told me today that when they were installed they observed that they were longer than the rubber lines that came off and that they tried (apparently unsuccessfully) to ensure the lines were routed to avoid any moving parts.

Has anybody else seen this or anything like it? I bought the lines from Detroit Tuned and have the question into Chad but I have to think something went wrong during installation but I've been real happy with my mechanic so I'd like to think the problem lies elsewhere.

Ideas?
__________________

2006 MCS HB/W / LSD / Sport / Convenience
Custom Stripes and Trim
JCW Exhaust, Alta CAI, 15% pulley
H-Sport Springs and Rear Sway Bar
Rota Subzero's, Aero Grill
Alta/IPF driving lights
"Oogah" Horn (using toggle bank)
Reply With Quote
  #2  
Old 05-06-2014, 04:30 AM
nathanrw's Avatar
nathanrw nathanrw is offline
Y Rated - 186 mph
 
Join Date: Oct 2012
Location: Middle Tennessee
Posts: 560
Default

Seems like a problem that would only be caused by improper installation to me…
__________________
Bagged 2004 Mini Cooper S
Reply With Quote
  #3  
Old 05-06-2014, 07:27 PM
Rally's Avatar
Rally Rally is offline
μ
 
Join Date: Nov 2005
Location: Newport Beach, Calif.
Posts: 32,222
Send a message via AIM to Rally
Default

Unless they were just insanely longer than stock, it just sounds like they installed them with too much slack. It'd be rather easier to have adjusted for the longer length and kept it away from the wheel.
__________________
Click the image to open in full size.
Reply With Quote
  #4  
Old 05-06-2014, 07:43 PM
Snip's's Avatar
Snip's Snip's is offline
Y Rated - 186 mph
 
Join Date: May 2010
Location: Lost in the weeds
Posts: 1,923
Default

The strut has a special formed bracket that accepts a rubber grommet that is part of the brake line (generally positioned in the middle of the length).... Is it possible this grommet wasn't properly inserted into the bracket? If not, the line could have been flopping around....

You can see them in the middle of mine....

Click the image to open in full size.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


CURRENT MOON

All times are GMT. The time now is 05:11 AM.
Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
©2005 motoring|underground, all rights reserved.