![]() |
#16
|
|||
|
|||
![]()
Yeah thanks for the input. I considering using the oven since I don't have a heat gun. Would doing the tail lights be similar?
__________________
|
#17
|
||||
|
||||
![]()
I did a write up of the tails a while ago. No oven, just slowly break the seal inching along the seam. I'd link you but I'm on my phone.
|
#18
|
|||
|
|||
![]()
i see. i've read to use a dremel, but i was just wondering if i could use the oven since as of now i don't have a dremel.
__________________
|
#19
|
||||
|
||||
![]()
the dremel is only really needed to break the seal, maybe an inch at the most. you could essentially get the same result by slowly cutting the same spot with an exacto.
the material/bonding agent used between the tails and the headlights are not the same so the oven has no significance when doing the tail lights. |
#20
|
|||
|
|||
![]()
I see. Well thank you for that clarification! I'm looking to do this tomorrow. I'll post some pics as I finish.
__________________
|
#21
|
|||
|
|||
![]()
well i did it! and it turned out better than i had expected! unfortunately when i turned the lights on there is some dust i forgot to remove.. so i'll have to clean that up. other than that they look great
![]() thanks to all of you guys for helping me along ![]()
__________________
|
#22
|
||||
|
||||
![]()
nice
not that I'm biased towards the color or anything
__________________
—Eric Quote:
![]() |
#23
|
||||
|
||||
![]()
Happy to help, looks good.
__________________
I'll get another 3rd party hosting site eventually... Just hope the old one dies a fiery death. ![]() But I'm not bitter.... ![]() |
#24
|
|||
|
|||
![]()
__________________
|
#25
|
||||
|
||||
![]()
I've been wanting to do this for SOOOO long! You may have just inspired me!
|
#26
|
||||
|
||||
![]()
I waited for 3 years or more, I ended up being filled with "Post Joey Mod Regret".
![]() Go ahead....push, push....nudge, nudge..... ![]()
__________________
I'll get another 3rd party hosting site eventually... Just hope the old one dies a fiery death. ![]() But I'm not bitter.... ![]() |
#27
|
|||
|
|||
![]()
I wish I had cool headlights to do this to...
__________________
03 Dark Silver MCS Thumper TPR2, NS1, Thumper ACG, Mynes FA53, Stratmosphere, Megan Racing coils "The feeling of maintaining control of something on the ragged edge of disaster is more addictive than anything" |
![]() |
Thread Tools | |
|
|