Sprintex, Rotrex, TVS, Turbo or ? - Page 77 - motoring|underground

Nitrominis · #**1141** 12-31-2011, 11:46 PM

Quote:

Originally Posted by Nitrominis

Here let me break it down.

"Luck" = Google it!

"who is doing specific aspects to working on vehicles"

There are are not always experienced individuals, trained skilled automotive technicians and/or mechanic's or even some self proclaimed laborers that perform work that at times results in less than satisfactory results.

" the chosen parts being used?"

Many parts available do not always have good quality, work well with other parts,or simply needing more attention than expected resulting once again in less than satisfactory results when used or by"who is doing specific aspects to working on vehicles"
.

If anyone gets much more out of my simple post I can't help that.

Quote:

Originally Posted by el diablito

yes....explain how this corresponds to CFMINI's car?

"If anyone gets much more out of my simple post I can't help that."

-$$

el diablito · #**1142** 01-01-2012, 12:22 AM

ok, it's obvious you are going to make innuendo......... so would you like to answer if you have run YOUR sprintex on YOUR Mini?

you should be able to give a simple answer here.........yes............OR ...............No?

Nitrominis · #**1143** 01-01-2012, 12:41 AM

Quote:

Originally Posted by el diablito

ok, it's obvious you are going to make innuendo......... so would you like to answer if you have run YOUR sprintex on YOUR Mini?

you should be able to give a simple answer here.........yes............OR ...............No?

Not exactly!

As I have made clear either here or other threads/forums(?) I believe currently the only one to have completely disassembled all of the Sprintex "kit", which includes the main unit all the way down to the rotors, measured everything and yup even flowed the manifolds.

el diablito · #**1144** 01-01-2012, 12:52 AM

a simple NO would have sufficed...........

AllBlack05S · #**1145** 01-01-2012, 12:55 AM

Hello kettle

not-so-rednwhitecooper · #**1146** 01-01-2012, 01:01 AM

jiminni · #**1147** 01-01-2012, 01:01 AM

Quote:

Originally Posted by jiminni

Really? Jan, did you or did you not say you would not sell a Rotrex kit without a built motor? Yes or no? Hard on? Really? No, I just want the facts, has does everyone else. How am I not correct on how much a RMW built stroker motor is? Just facts please, telling me to come out and see the car dosent help. I have never said that I'm sure your car is not fast.....thats obvious from the times it puts down. I just want to know how much it took to do it.

Quote:

Originally Posted by el diablito

ok, it's obvious you are going to make innuendo......... so would you like to answer if you have run YOUR sprintex on YOUR Mini?

you should be able to give a simple answer here.........yes............OR ...............No?

Quote:

Originally Posted by AllBlack05S

Hello kettle

Paul Webster · #**1148** 01-01-2012, 10:29 AM

I wonder if by the end of 2012 we will know the answer to Sprintex, Rotrex, TVS, Turbo or

Paul Webster · #**1149** 01-01-2012, 01:29 PM

All the best increments at the drag strip for the Sprintex with a Cooper S head on in 2011 indicates we should be able to run a 12.3176 1/4 mile without nitrous.

This will be our first goal for 2012.........unfortunatley I cant seeing us having that much time to try and run a 11 without nitrous as we will have a lot of other R&D projects on the go but we will give it our best shot.

As you can see above LB's car when it was a 1.6 Rotrex made 296 hhp without W/M, admittley on Cali gas which we know is a lot worse than our gas............from what Shawn Church has said on other forums and others who have dyno'd within an 1hr on his dynapck and a local dynojet you have to -7%, so 296hhp - 7% = 277whp, which is quite some number on Cali gas whichever way you look at it.

With W/M it makes 330hhp -7% which is 307whp......though we have acheived 272 whp on our Mustang dyno we might not be able to get near this figure with the current JCW head, but we will try our best with the Sprintex to acheive this.

Whichever way you look at it 2012 will be a good year for MINI petrol heads

D!CKS GARAGE R 53 · #**1150** 01-02-2012, 09:26 PM

This died all at once!

Anybody working on anything new? Maby Nelson is out trying to figure out how to wire up a piggyback so he can unlock the power from his recent Turbonator install...