motoring|underground

motoring|underground (http://www.motoringunderground.com/forum/index.php)
-   Tire & Wheel (http://www.motoringunderground.com/forum/forumdisplay.php?f=26)
-   -   The answer to, "will it fit" (http://www.motoringunderground.com/forum/showthread.php?t=1029)

planecode 02-04-2010 08:25 PM

that's my question - the tires are 175/65r15 but I'm not sure what the wheels are...

glnr13 02-04-2010 10:00 PM

OEM holies are 15"x5.5"

planecode 02-05-2010 01:09 PM

Quote:

Originally Posted by glnr13 (Post 560863)
OEM holies are 15"x5.5"

Thanks... now I can figure out what direction I can go with the wheels I've got... for now :cool:

Rally 02-10-2010 12:55 AM

Check out how small 3mm is and you'll see that you'll have very little trouble running 9 et22 in the rear. :tu:

Izz 02-10-2010 01:16 AM

If you're talking 17x8 et20 up front, they'll poke a decent amount. Check out thewanderers car for a visual. Pretty much the same specs to what you're considering.

http://www.motoringunderground.com/f...t=3652&page=12

Antinontoxic 03-15-2010 06:06 PM

Do I need camber plates and/or adjustable rear control arms to fit the following:

17x8 ET20 205/40
17x9 ET26 215/40

KW coilovers will be used.

Chase 03-15-2010 06:31 PM

yes

Antinontoxic 03-15-2010 09:25 PM

Quote:

Originally Posted by Chase (Post 577518)
yes

As I thought.

Any advices which ones to use with KW coils?

simplygriff 03-15-2010 09:44 PM

I have TSW plates up front and H-sport control arms with my KW V1 coils. Other than some crazy rattling gremlins in the rear, no issues. The rattling is pretty bad and I've had a few people look and no one can find the cause.
-G

topher 04-19-2010 03:56 AM

Ok, help me find tires.

I ordered Team Dynamics Pro Race 1.2 et 45 17x7. Out Motoring had a whole slew of ETs to choose from but said this worked best for MINI fitament, so I'm hoping that's the case.

Now I'm wrestling with tire sizes:
215/40
225/40
???/??

Car is currently at OEM ride height.

rjtrout2000 04-26-2010 06:13 PM

I run a 215/40/17 and I have to say, I love the look and the they fit well with my car lowered on TSW springs.

joshk 04-30-2010 01:57 AM

I have a 2007 R56 MCS. It's currently at stock ride height. I will be getting coilovers in the future but will be driving around at stock height for a while.
I'm about to order some Rota RB's and wanted to make sure I was getting the right size. How does the following look?

I'm looking at:

Rota RB's 16x8, 4x100, 57.1, 35 offset

What would be the best tire for this setup? 205/50? 215/50? I want to make sure the same tire will work at stock ride height as well as lowered.

Thanks!

Puma 04-30-2010 02:39 AM

Offset is good. Do you want stretch on the tires? The problem with fitting it will arise with the tires. If they're too tall, you might rub once you lower the car. Other guys will have more info, but most of them are away this week. Glen should have some good advice too.

Glen? Herro? :P

STIGONE 06-08-2010 03:23 AM

will a 17x9 et40 with a 235/40/17 fit on a 2009 r56 jcw running gen 2 BC coilovers ?

Rally 06-08-2010 03:25 AM

No.


All times are GMT. The time now is 07:27 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
2005 motoring|underground, all rights reserved.