motoring|underground

motoring|underground (http://www.motoringunderground.com/forum/index.php)
-   OTLounge (http://www.motoringunderground.com/forum/forumdisplay.php?f=6)
-   -   I Make Things Out Of Metal... (http://www.motoringunderground.com/forum/showthread.php?t=24799)

werD 07-03-2017 01:51 AM

Dern. That's really cool.

Snip's 07-30-2017 01:46 PM

3 Attachment(s)
I get a lot of business doing custom stainless countertops for local restaurants....

This one happens to be for a church with the kitchen in the basement.... Worked out to over 40 Lf of countertop....

Had to be made as a "bolt together" assembly to make it easier to get into the kitchen....

They wanted the sink bowl to have a drain board...

Just finished making it Friday and it gets installed tomorrow....

It's a big one...
Attachment 7832

Sink with drain board
Attachment 7833

Tight fitting "bolt together" joint....
Attachment 7834

They should be good for their upcoming Friday "Fish Fry" dinner...

werD 07-31-2017 02:45 AM

Dern. Thatsalottasink!

Snip's 08-26-2017 12:22 AM

2 Attachment(s)
A small project....

Made a floating shelf out of 1/4" thick steel that was installed as a fireplace mantle....

Attachment 7835

Attachment 7836

Snip's 12-09-2017 04:28 PM

3 Attachment(s)
Haven't posted in a while... It's been a crazy year in so many ways....

Just finished making a 10' long x 3" thick copper counter top that will accept an under mount sink bowl...

Attachment 7849

Attachment 7850



Playing around in the shop welding two dissimilar materials.... Stainless steel to copper...

Attachment 7851

werD 12-10-2017 11:39 PM

Stainless & copper. Never thought about that, hard to weld?

Snip's 12-11-2017 06:07 PM

Quote:

Originally Posted by werD (Post 805507)
Stainless & copper. Never thought about that, hard to weld?

It's Tig welded with 308 SS filler rod...

The trick is to preheat the copper...

werD 12-16-2017 09:43 PM

Cool!

Snip's 12-19-2017 09:09 PM

2 Attachment(s)
Something a little different....

Finished up with a round picnic table today and delivered it to a facility that will hot dip galvanize it for me.

The top "spoked wagon wheel" will support a 1-1/4 thick white Carrara marble top. There will be a 12" center hole with a bollard post supporting a copper lamp in the center of the table top. Seating will be on the three curved plates that will have a matching 3" thick piece of white oak.

Attachment 7858

Attachment 7859

beken 12-20-2017 06:02 PM

That is some nice metalwork.

Snip's 12-21-2017 04:11 PM

Quote:

Originally Posted by beken (Post 805524)
That is some nice metalwork.

Thank you....:redface:

It's been in the same family business since we started way back on 1879..... Started with making horse shoes....:eek:

werD 12-22-2017 01:15 AM

Cool stuff.

Snip's 12-23-2017 05:27 PM

My neighbor, who is a Porsche aficionado, recently had his 356 undergo a complete ground up rebuild, then had an artist capture his Porsche in a painting.... Apparently he liked my shop as a backdrop...:D


http://www.jimmurrinart.com/about-the-artist/

http://www.jimmurrinart.com/wp-conte...l_on_panel.jpg

Snip's 12-23-2017 08:42 PM

Soooo many cool cars park in front of my place...:)

https://www.motoringalliance.com/for...dsc_5423-l.jpg

beken 12-29-2017 09:27 PM

That is so cool.


All times are GMT. The time now is 08:49 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
2005 motoring|underground, all rights reserved.